Collection: Neon LED Strip Lights

Standard LED tape exposes individual LED chips on a flexible circuit board, which can produce visible hot spots or dot patterns at close viewing distances. Neon LED strip lights encase the LEDs inside a thick silicone or PVC sleeve that diffuses the light into a smooth, continuous glow with no visible dots. This makes neon flex the preferred choice for signage, architectural outlining, and any application where the strip itself is visible.

LED neon flex produces a similar continuous glow to glass neon but is low-voltage, cool to the touch, shatterproof, and uses up to 80% less energy. Glass neon requires high voltage, generates significant heat, is fragile, and requires skilled artisan fabrication. LED neon flex can be bent and shaped by hand, cut to length at marked intervals, and installed without specialized equipment — making it far more practical for both commercial and residential applications.

Minimum bend radius varies by product profile and sleeve thickness, but most standard neon flex can achieve a bend radius of 1–4 inches without kinking or damaging the internal LED strip. Thinner profiles and round cross-section neon flex bend more tightly than wider flat profiles. Always check the manufacturer's minimum bend radius specification before forming tight curves or letter shapes.

Yes — most neon LED flex carries an IP65 or IP67 rating, making it waterproof and UV-resistant for permanent outdoor installation. This makes it ideal for roofline outlining, façade accents, deck and railing lighting, and outdoor signage. Always verify the IP rating of the specific product and ensure all connection points and cut ends are properly sealed with compatible end caps and waterproof connectors.

Yes, but cut points are less frequent than on standard LED tape — typically every 1–3 feet depending on the product. Always cut only at the designated marked intervals; cutting between marks will damage the internal LED circuit and that segment will not illuminate. Use a sharp blade for a clean cut and seal the cut end immediately with a compatible silicone end cap to maintain the IP rating.

Yes — most neon LED flex is dimmable when paired with a compatible low-voltage PWM dimmer or dimmable LED driver matched to the strip's voltage and wattage. Single-color neon flex uses a standard 2-wire dimmer. RGB neon flex requires a multi-channel RGB controller. Always verify dimmer compatibility with the specific neon flex product before purchase to avoid flickering or buzzing.

Yes — smart neon LED flex with Wi-Fi or Bluetooth controllers is available, enabling app control, voice assistant integration (Alexa, Google Home, HomeKit), color changes, and scheduling. Smart neon flex combines the seamless dotless glow of neon flex with the full control capability of a smart strip system — ideal for entertainment spaces, bars, and retail environments requiring dynamic color and remote control.

Neon LED flex is available in fixed single colors (white, warm white, red, blue, green, yellow, pink, and more), as well as RGB color-changing and RGBW configurations. Single-color neon flex is most common for signage and architectural outlining. RGB neon flex enables dynamic color effects for entertainment and decorative applications with an appropriate controller.

Yes — neon LED flex is a popular alternative to standard tape in an aluminum channel with diffuser for cove lighting. The built-in silicone sleeve eliminates the need for a separate diffuser and produces a similar smooth, dotless line of light. For cove applications requiring precise CCT matching, dimming performance, or COB technology, a diffused aluminum channel system still offers more flexibility. For straightforward warm or white cove accents, neon flex is a simpler, more installation-friendly option.

To create an LED neon sign, plan your letter or logo design on paper first and calculate the total length of neon flex required. Mount the flex to an acrylic backing board using neon flex mounting clips spaced every 4–6 inches, bending the tube to follow the design shape. Connect to a matched driver and controller, then seal all cut ends. For complex lettering or logos, pre-make a template and bend the flex to shape before mounting for best accuracy.