Skip to content

Free Shipping over $99! (excludes 48"+)

Cart

Description

Satco 65-905 Dual/Quad T8 Lamp Ready 8ft Strip Light Channel — 660W — G13/Fa8/R17d Sockets — 120–347V — White

The Satco 65-905 is a commercial 8ft Dual/Quad T8 Lamp Ready Fixture Channel engineered to streamline long-run linear lighting installations across warehouses, retail floors, gymnasiums, and task areas. Configurable for either two 8ft T8 lamps or four 4ft T8 lamps (lamps sold separately) up to 660W on 120–347V electrical systems, this empty body fixture ships complete with 8x G13 wired lamp holders (for 4x4ft setups) and 4x Fa8 single-pin wired lamp holders (for 2x8ft setups), while also supporting interchangeable R17d lamp holders (sold separately). Built with a cETLus Listed damp location rating, the fixture ships in two 4ft steel sections with a rigid connector plate for simplified handling and features a deep channel with integrated knockouts for wiring and emergency test button access.

Key Features

  • Dual / Quad Lamp Configuration: Configurable for (2) 8ft T8 lamps or (4) 4ft T8 lamps (lamps not included)
  • Included & Compatible Sockets (G13, Fa8, R17d): Kit includes 8x pre-wired G13 medium bi-pin holders (for 4x4ft installation) and 4x pre-wired Fa8 single-pin holders (for 2x8ft installation); compatible with interchangeable R17d recessed double-contact holders (65-909 sold separately)
  • Maximum Wattage Rating: Up to 660W max (actual system wattage and lumen output depend on installed lamps and ballast)
  • Type B & Type A Flexibility: Pre-configured for Type B ballast-bypass LED tubes with a deep 3.70" channel profile to accommodate a driver/ballast for Type A configurations or emergency backup drivers
  • Two-Piece 4ft Assembly: Ships in two 4ft steel sections with an included connector plate for easier transport, lower shipping overhead, and secure end-to-end assembly
  • Wiring & EM Knockouts: Integrated knockouts support quick electrical wiring and emergency (EM) test button access
  • Dimming: Lamp-dependent dimming operation
  • Voltage: Universal 120–347V AC, 50/60Hz range voltage (0.075–0.026A operating current)
  • Location Rating: cETLus Listed for indoor damp locations
  • Certifications: cETLus Listed, NLB Trusted, California Title 20 Exempt (Lawful for sale in California)
  • Warranty: 1-year limited warranty — Satco
  • Dimensions & Weight: Assembled 97.00" L × 4.70" W × 3.70" H; fixture weight 8.60 lbs

Performance & Light Output

As a configurable 8ft empty body lamp-ready channel rated up to 660W, total lumen output, system wattage, efficacy, color rendering (CRI), and color temperature (CCT) are determined by the four 4ft G13-base T8 tubes or two 8ft Fa8/R17d-base T8 tubes installed by the user (lamps sold separately).

Designed for maximum retrofit versatility, the channel supports direct-wire UL Type B ballast-bypass LED tubes while providing ample internal channel volume to mount a ballast or LED driver for Type A installations.

Form Factor & Design Profile

To eliminate the freight damage and handling challenges of single-piece 8-foot housings, the Satco 65-905 ships in a compact 4-foot case containing two 4-foot steel channel sections and a structural connector plate that locks the sections into a rigid 97.00-inch luminaire. Its deep 3.70-inch channel houses internal wiring, ballasts, or emergency LED drivers, while pre-punched knockouts provide immediate access for conduit feeds and an emergency driver test switch.

Electrical

Rated for 120–347V AC at 50/60Hz with a 660W maximum capacity and an operating current rating of 0.075A to 0.026A (voltage, wattage, and dimming are dependent on the installed lamp and ballast/driver). The kit includes 8x G13 wired lamp holders for 4x4ft installations and 4x Fa8 single-pin wired lamp holders for 2x8ft installations, and accepts interchangeable R17d lamp holders (catalog # 65-909, sold separately).

Emergency Battery Backup: Deep channel and integrated EM test button knockout accommodate compatible Satco emergency LED drivers including S8000 (5W Emergency LED Driver) and S8002 (10W Emergency LED Driver), sold separately.

Construction

Durability & Impact Protection: Heavy-duty formed steel channel construction engineered for demanding commercial, warehouse, and gymnasium environments. Compatible with an optional 8ft Add-On Reflector (65-906) and 8ft Cambered Protective Cage (65-907), both sold separately in 2x4ft sections.

Ingress Protection: Certified for indoor damp locations.

Finish: White finish formulated for corrosion resistance and clean visual appearance.

Dimensions & Weight: Assembled dimensions: 97.00" L × 4.70" W × 3.70" H (Ships in 4ft case: 49.20" L × 5.11" W × 4.33" H). Fixture weight: 8.60 lbs (9.24 lbs packaged).

Installation & Mounting

Standard Mounting: Engineered for direct surface ceiling mounting or suspended chain/cable installation. Ships as two 4ft channel pieces that join together securely using the included connector plate.

Accessories (Sold Separately):

  • Add-On Reflector: 65-906 (8' Reflector for use with 65-905 — 2 x 4' sections)
  • Wire Guard / Protective Cage: 65-907 (8' Cambered Protective Cage for use with 65-905 — 2 x 4' sections)
  • Lamp Holder Wiring Kits: 65-909 (R17d Lamp Holder Wiring Kit) and 65-908 (Replacement Fa8 Lamp Holder Wiring Kit)
  • Suspension Hardware: 65-919 (3' Suspension Kit — 65-905 requires 3 kits for suspended installation)
  • Emergency Battery Backup: S8000 (5W Emergency LED Driver) and S8002 (10W Emergency LED Driver)

Certifications & Rebates

  • cETLus Listed: Certified for indoor damp locations per commercial electrical safety standards.
  • NLB Trusted: Verified under the National Lighting Bureau Trusted Warranty Program.
  • California Compliance: California Title 20 Exempt and lawful for sale in California.
  • Warranty: Backed by Satco's 1-year limited warranty.

Typical Applications

  • Warehouses & Distribution Aisles — 8ft dual/quad linear span and 120–347V compatibility deliver broad illumination down high-bay and low-bay racking aisles.
  • Gymnasiums & Athletic Centers — Steel body pairs with optional 8ft reflectors (65-906) and cambered wire cages (65-907, sold separately) to protect lamps from impact.
  • Retail Supermarkets & Big-Box Stores — Configurable 4x4ft (G13) or 2x8ft (Fa8/R17d) socket layout lets contractors standardize on preferred T8 lamp inventory.
  • Commercial Task & Assembly Lines — Deep channel design accommodates Type B ballast-bypass tubes, Type A drivers, and optional 5W/10W emergency battery backups.
  • Retrofit Corridor & Utility Runs — Two-piece 4ft shipping design simplifies elevator transport and ceiling staging during multi-floor commercial retrofits.

What's Included

  • Satco 65-905 8ft Dual/Quad T8 Lamp Ready Fixture Channel (Two 4ft Steel Sections) — White (Lamps Not Included)
  • Structural Center Connector Plate
  • (8) Pre-Wired G13 Lamp Holders (for 4 x 4ft T8 lamp installation)
  • (4) Pre-Wired Fa8 Single-Pin Lamp Holders (for 2 x 8ft T8 lamp installation)
  • Installation and wiring guide

Specifications

Dimensions

Length/Depth
97 in
Width/Diameter
4.7 in
Height
3.7 in
Weight
8.6 lb

Style & Materials

Material
Steel

Electrical Information

Voltage
120-347V

Item Details

MPN
65-905
Brand
SATCO|NUVO
UPC
045923409905

Warranty & Certifications

Product Warranty
1 Year
Product Rating
Damp Rated

Shipping & Returns

Shipping: Enjoy free standard shipping on most orders over $99. Exclusions apply for oversized & commercial items. We ship to the contiguous 48 United States.

Returns: We offer a 60-day return window for most items. Products must be in their original, unused condition with all packaging. Exclusions: Special orders, clearance, and custom items.

See Full Shipping Policy | See Full Return Policy

Frequently Asked Questions

How is the Satco 65-905 8ft lamp ready fixture assembled and mounted?

The Satco 65-905 ships in a compact 4ft case containing two 4ft steel sections that join securely into an 8ft (97-inch) fixture using the included connector plate. It supports direct surface mounting or suspended mounting using three optional Satco 65-919 suspension kits (sold separately).

Which lamp holders come included with the Satco 65-905 and which are sold separately?

The 65-905 kit includes 8 pre-wired G13 medium bi-pin holders for a four-lamp (4x4ft) setup and 4 pre-wired Fa8 single-pin holders for a two-lamp (2x8ft) setup. The fixture also accepts interchangeable R17d recessed double-contact lamp holders via the Satco 65-909 wiring kit, which is sold separately along with all T8 lamps.

What are the voltage, wattage, and location ratings for the Satco 65-905?

The Satco 65-905 is rated for universal 120-347V AC operation at 50/60Hz (0.075-0.026A) with a 660W maximum wattage capacity dependent on the installed lamps and ballast. It is cETLus Listed for indoor damp locations, California Title 20 exempt, and backed by a 1-year limited warranty.

Does the Satco 65-905 support Type B bypass tubes, Type A ballasts, and emergency drivers?

Yes, the fixture is pre-configured for Type B ballast-bypass LED tubes and features a deep 3.70-inch channel with an emergency test button knockout to house a Type A driver or emergency backup. Compatible 5W (S8000) and 10W (S8002) emergency LED drivers are available and sold separately.

What optional reflectors and protective cages fit the Satco 65-905 8ft channel?

For industrial, warehouse, and gymnasium installations, the Satco 65-905 accepts the 8ft add-on reflector (65-906) and the 8ft cambered protective wire cage (65-907), both sold separately in two 4ft sections. Replacement Fa8 socket kits (65-908) and R17d socket kits (65-909) are also sold separately.
nuvo-brand - Bees Lighting

SATCO|NUVO

For over 50 years, SATCO|NUVO has established itself as a premier, one-stop source for every type of lighting need. The brand is built on a legacy of trust, with SATCO providing one of the industry's largest offerings of high-quality light bulbs and solutions. This is perfectly complemented by NUVO, a diverse line of decorative fixtures that ranges from chandeliers and pendants to outdoor lighting. Together, SATCO|NUVO offers a comprehensive and reliable lighting portfolio for residential, commercial, and industrial projects.

Shop SATCO|NUVO