RAB Lighting TEMP17 LED Temporary Work Light — 150W

The TEMP17-150 is a high-performance LED temporary work light engineered to directly replace legacy 600W metal halide fixtures. Consuming just 150W of power, this lightweight luminaire produces a brilliant 18,000 lumens while operating on a standard 120V electrical input. Its highly durable construction and convenient daisy-chain capabilities make it the premier solution for contractors requiring reliable, large-scale temporary illumination on active job sites.

Key Features

• Light Output: Generates 18,000 lumens with an excellent efficacy of 120 LPW.
• Input Voltage: Operates seamlessly on a standard 120V electrical input.
• Color Temperature: Produces a crisp 5000K daylight white illumination.
• Beam Angle: Provides an omnidirectional 360-degree light distribution.
• Linkability: Daisy-chain up to four 150W units for a maximum 600W total run.
• Surge Protection: Built-in 4kV surge protection guards against job site power spikes.
• Durability: Housed in a UV-resistant, impact-resistant polycarbonate enclosure with cage.
• Lifespan: Rated for a 30,000-hour LED life based on IES LM-70 testing.
• CRI: 80 Color Rendering Index for clear, accurate visual clarity.
• Equivalent: Designed to directly replace 600W metal halide site lights.

Typical Applications

• Commercial and residential new construction sites.
• Industrial plant maintenance and factory turnarounds.
• Warehouse and storage facility staging areas.
• Tunnel, bridge, and infrastructure repair zones.
• Emergency response and disaster relief operations.

Performance & Light Output

This high-output fixture generates 18,000 lumens at an efficacy of 120 LPW, ensuring expansive and energy-efficient illumination. It emits a crisp 5000K daylight color temperature with an 80 CRI for clear visibility in hazardous work zones. The omnidirectional 360-degree beam angle provides wide, shadow-free light distribution, while the LEDs maintain reliable output over a 30,000-hour rated lifespan.

Electrical & Controls

Equipped with a dedicated 120V driver, this unit delivers consistent, flicker-reduced illumination tailored for standard US power sources. It features 4kV surge protection to shield internal components from the severe electrical transients commonly experienced on active industrial sites. This non-dimmable light operates reliably with a power factor greater than 0.9, requiring no advanced controls.

Construction & Durability

Engineered to endure abusive job site environments, the main housing and protective cage use high-impact, UV-resistant polycarbonate. The lightweight, shatter-resistant design handles drops and impacts while remaining easy to transport. Rated IP64 for wet locations, the fixture effectively blocks dust and water ingress, operating safely in extreme ambient temperatures.

Installation & Mounting

Deployment is rapid and straightforward using the included heavy-duty steel carabiner, which allows for secure overhead hang mounting from scaffolding, cables, or chains. The plug-and-play setup features a 6-foot cord with a standard US 120V plug and an integrated receptacle, enabling contractors to easily daisy-chain multiple 150W fixtures together.

What's Included

• LED Temporary Work Light with Protective Cage
• 6-Foot Power Cord with 120V Plug
• Heavy-Duty Steel Mounting Carabiner