The Minka Aire Dyno F1000-BBR/ALW pairs a 52" span and five Alabaster White blades with a Brushed Brass finish. Its three-speed AC motor delivers 4,509 CFM at approximately 70 CFM/W. An included 20W LED supplies 1,593.65 delivered lumens of 3000K light. Dry rated for indoor living spaces, the Dyno includes an RCS213-S remote.

Key Features

• Blade Design: 52" span, five reversible plywood blades with paper overlay, Alabaster White, 12 degree pitch
• Motor: AC, 153 x 17 mm, three speeds, reversible rotation
• Airflow: 4,509 CFM high, 1,520 CFM low, 69.58 CFM/W high
• Fan Power: 64.8W high, 10.54W low, 62 to 172 RPM
• Integrated Light: 20W LED, 1,593.65 delivered lumens, 3000K, 90 CRI, dimmable
• LED Life: 30,000-hour rated life, etched polycarbonate shade
• Location: Dry rated, indoor use, ETL listed
• Control: RCS213-S remote included, reverse switch on fan
• Mounting: 6" downrod included, slopes up to 18 degrees, 80" lead wire
• Dimensions: 52" diameter, 14.5" overall height, 11.25" ceiling-to-blade distance

Smart & Control Features

The included RCS213-S remote provides convenient three-speed fan control. A reverse switch on the fan changes rotation for seasonal circulation. The LED is dimmable. Optional WCS213-S wall control and Bond Hub BD-1000 are sold separately. Bond connectivity requires the separate hub.

Construction & Design

The Brushed Brass finish contrasts with five Alabaster White plywood blades with paper overlay. The reversible blades have a 12 degree pitch and measure 20.5" long by 5" wide. An etched polycarbonate shade measures 5.25" wide by 1" high. The assembled fan weighs 15.43 lb. The vented motor silhouette and five-blade layout suit transitional interiors.

Light Output & Performance

The included 20W integrated LED provides 1,593.65 delivered lumens at 3000K, with 90 CRI and a 30,000-hour rated life. The light is dimmable and diffused through etched polycarbonate.

Electrical & Installation

Designed for 120V input, the reversible AC motor uses 64.8W at high speed; the integrated LED uses 20W. The reverse switch is located on the fan. A 6" downrod is included, standard mounting supports slopes up to 18 degrees, and the lead wire measures 80". Overall height is 14.5", with the blades 11.25" below the ceiling. Maintain at least 7 ft between the floor and fan blades.

Suggested Downrod by Ceiling Height

Includes a 6" downrod. Maintain at least 7 ft of floor-to-blade clearance.

• 9 ft ceiling → 12" downrod
• 10 ft ceiling → 18" downrod
• 12 ft ceiling → 24" downrod
• 14 ft ceiling → 36" downrod
• 16 ft ceiling → 48" downrod
• 18 ft ceiling → 60" downrod
• 20 ft ceiling → 72" downrod

What's Included

• Dyno fan with Brushed Brass finish and five Alabaster White plywood blades with paper overlay
• 20W integrated LED light kit with etched polycarbonate shade
• RCS213-S remote control
• 6" downrod
• Mounting hardware