LEDVANCE Sylvania Hazardous Location LED Jelly Jar — 20W, 2,200lm, 3000K & 5000K, Class I Div 2 / Class II Div 1&2, IP66, 120-347V, Ceiling/Pendant Mount, Gray

The LEDVANCE Sylvania Performance Hazardous Location LED Jelly Jar is a compact, industrial-grade vapor tight luminaire engineered for environments where explosive gases, combustible dusts, or flammable vapors are present. Available in 3000K warm white (66822) and 5000K daylight (66823), both models deliver 20W / 2,200 lumens / 110 LPW at 80 CRI through a copper-free aluminum housing with a tempered glass lens and protective metal guard. Both carry Class I, Division 2 and Class II, Division 1 & 2 hazardous location certifications, are rated IP66 and IK08, feature 0-10V dimming, and operate on a universal 120-347V input. Rated for 100,000 hours L70 with a 5-year warranty, these fixtures are built for petrochemical plants, grain handling facilities, wastewater treatment, heavy manufacturing, and marine/offshore applications where standard fixtures cannot be used.

LEDVANCE Sylvania Hazardous Location Jelly Jar Features

• Class I, Division 2 & Class II, Division 1/2 Certified: Approved for use in locations where flammable gases, vapors, combustible dusts, or ignitable fibers may be present — meets NEC Article 500 hazardous location requirements.
• Two CCT Options: 3000K warm white (66822) for environments where warmer light is preferred; 5000K daylight (66823) for maximum visual acuity during critical inspection and safety tasks.
• 20W / 2,200 Lumens / 110 LPW: High-efficacy LED output in a compact jelly jar form factor — replaces legacy HID and incandescent jelly jar fixtures at a fraction of the energy cost.
• Copper-Free Aluminum Housing: Corrosion-resistant die-cast aluminum — copper-free formulation prevents galvanic corrosion in petrochemical, marine, and caustic chemical environments.
• Tempered Glass Lens with Metal Guard: Heat-resistant tempered glass lens protected by a robust metal guard shields internal components from high-vibration stress and physical impact common in heavy industrial applications.
• IP66 Rated: Fully sealed against dust ingress and direct high-pressure water jets — suitable for washdown environments and severe outdoor/indoor industrial exposure.
• IK08 Impact Resistance: Withstands 5-joule mechanical impacts from tools, debris, and industrial equipment.
• 0-10V Dimming: Full dimming interface for integration with industrial lighting control and energy management systems.
• Universal Voltage: 120-347V input — compatible with standard commercial and higher-voltage industrial power systems without a transformer.
• 80 CRI: Accurate color rendering for detailed inspections, maintenance, and safety checks in industrial environments.
• Wide Operating Temperature: Rated from -4°F to 104°F (-20°C to 40°C) for reliable operation in cold storage, outdoor, and high-ambient industrial environments.
• Ceiling & Pendant Mount: Supports both ceiling surface and pendant/chain mounting for flexible installation in hazardous zones.
• 100,000-Hour L70 Lifespan: Dramatically reduces re-lamping and maintenance costs in hard-to-access industrial and hazardous installations.
• 5-Year Warranty: Backed by LEDVANCE Sylvania’s standard product warranty.

Hazardous Location Classifications

Both models are certified for the following NEC hazardous location classifications:

• Class I, Division 2: Locations where flammable gases or vapors are handled, processed, or used, but are not normally present in ignitable concentrations — includes petrochemical plants, refineries, and fuel handling areas.
• Class II, Division 1: Locations where combustible dust is in the air in quantities sufficient to produce explosive or ignitable mixtures — includes grain elevators, flour mills, and coal handling facilities.
• Class II, Division 2: Locations where combustible dust is not normally in suspension but may accumulate on or near electrical equipment — includes agricultural storage and processing facilities.

CCT Options & Specifications

• 3000K — Warm White (66822): 20W — 2,200lm — 110 LPW — 80 CRI — 120-347V — 5.0”×5.0”×10.8” — IP66 / IK08 — Class I Div 2 / Class II Div 1&2
• 5000K — Daylight (66823): 20W — 2,200lm — 110 LPW — 80 CRI — 120-347V — 5.0”×5.0”×10.8” — IP66 / IK08 — Class I Div 2 / Class II Div 1&2

All models: Copper-free aluminum — Tempered glass lens — Metal guard — Gray finish — 0-10V dimming — -4°F to 104°F — 100,000hr L70 — 5-year warranty — Ceiling/pendant mount

Typical Applications

• Petrochemical refineries, processing plants, and fuel storage facilities.
• Grain elevators, flour mills, and agricultural storage facilities.
• Wastewater treatment plants and pumping stations.
• Heavy manufacturing, foundry floors, and steel mills.
• Marine and offshore drilling platforms.
• Chemical processing and pharmaceutical manufacturing facilities.
• Cold storage and refrigerated warehouse facilities.
• Any hazardous location requiring a compact, ceiling or pendant-mounted vapor tight luminaire.

Performance & Light Output

Both models deliver 20W / 2,200 lumens / 110 LPW at 80 CRI — providing a significant efficacy improvement over legacy HID and incandescent jelly jar fixtures. The 3000K model provides warm white illumination suited to environments where reduced glare is preferred; the 5000K model delivers crisp daylight output that maximizes visual acuity for critical inspection, maintenance, and safety tasks. The 100,000-hour L70 lifespan dramatically reduces maintenance frequency in hard-to-access hazardous installations.

Electrical & Controls

Both models operate on a universal 120-347V AC input, integrating directly into standard commercial and higher-voltage industrial power systems without a step-down transformer. The 0-10V dimming interface allows integration with automated facility lighting control systems. Internal electrical components are engineered to handle industrial power fluctuations safely.

Construction & Durability

The die-cast copper-free aluminum housing resists corrosion in petrochemical, marine, and caustic chemical environments. The tempered glass lens provides superior heat resistance and durability compared to polycarbonate alternatives, while the protective metal guard shields the lens from high-vibration stress and physical impact. IP66 rating provides complete dust exclusion and protection against direct high-pressure water jets. IK08 rating withstands 5-joule mechanical impacts. Operating range: -4°F to 104°F.

Installation & Mounting

Both models support ceiling surface mounting and pendant/chain mounting for flexible installation in hazardous zones. The compact 5.0”×5.0”×10.8” form factor fits in tight spaces where larger industrial fixtures cannot be used. Conduit entry points are provided for sealed wiring connections in hazardous location installations. Ensure all conduit seals and fittings comply with NEC Article 501 requirements for Class I, Division 2 installations.

What’s Included

• LEDVANCE Sylvania Hazardous Location LED Jelly Jar — Gray (CCT selected above)
• Protective Metal Guard