American Lighting Trulux 100-Foot COB LED Tape, 5000K Daylight, 448 lm/ft, 24V DC, IP54
Available in stock (50)
About this item
About this item
- COB Light Engine: 5000K Daylight light provides a continuous-looking line that reduces visible LED dotting.
- Power Requirements: The tape operates at 24V DC and consumes 4.5 watts per foot.
- Light Output: Rated output is 448 lumens per foot with a color rendering index of 90+.
- Run Length and Cutting: Divide the 100 ft reel into runs no longer than 16.4 ft, cutting only at marked 1.97-inch increments.
- Coated Construction: IP54 nano-coated tape features 3M VHB backing for indoor dry and damp installations without direct water contact.
Description
Description
American Lighting Trulux COB LED Tape — 5000K Daylight & High Output
American Lighting HTL-COB-CW-100 supplies 100 ft of Daylight COB tape rated 24V DC, 4.5W/ft, 448 lm/ft and 5000K. The IP54 nano-coated tape is for indoor dry and damp locations without direct water contact; divide the reel into runs no longer than 16.4 ft.
Key Features
- Light Engine: COB phosphor coating provides a continuous-looking line that reduces visible LED dotting.
- Color Quality: 5000K Daylight light with 90+ CRI supports consistent color presentation.
- Electrical Rating: Operates at 24V DC and 4.5W/ft; select the driver for each connected load.
- Light Output: Rated 448 lumens per foot with a 120° beam angle.
- Layout: Maximum continuous run is 16.4 ft, with marked 1.97-inch (50 mm) cutting increments.
- Profile: Published dimensions are 0.39 inch (10 mm) wide by 0.09 inch (2.5 mm) high.
- Control: Supports 5–100% dimming with most ELV and TRIAC dimmers through compatible equipment.
Core Design & Construction
A light nano-coating protects the tape and LEDs from moisture and dust. The 3M VHB adhesive backing mounts to a smooth, clean, non-moving surface. Allow 24 hours for adhesive curing before first use; do not reposition or reuse the tape after mounting.
LED Illumination & Performance
The Daylight COB engine combines 5000K output, 448 lm/ft and 90+ CRI. Its phosphor-coated light source reduces spotting on reflective surfaces. Final appearance depends on mounting geometry and viewing conditions; no diffuser or channel is identified as included.
Power, Wiring & Installation
Requires a compatible 24V DC LED driver. Manufacturer-listed compatible drivers include the Adaptive ADPT-DRJ-30-24, -60-24, -96-24, -192-24 and -288-24 models; load limits and dimming compatibility apply. Cut only at marked points, observe polarity and keep every run within 16.4 ft. Never operate the tape coiled or on its reel.
Where This Tape Works Best
Designed for low-clearance installations and areas with reflective surfaces where visible LED dots are undesirable. Use indoors in dry or damp locations, away from direct contact with water or accumulating moisture.
What's Included
- One 100 ft IP54 COB tape reel with a 6 ft lead and 6 ft tail.
- One TL-CONKIT connection kit.
- Three TL-BLKS.
- Three TL-2PWR-HD power feeds.
Specifications
Specifications
Dimensions
Documents
Characteristics & Features
Electrical Information
Item Details
Warranty & Certifications
Shipping & Returns
Shipping: Enjoy free standard shipping on most orders over $99. Exclusions apply for oversized & commercial items. We ship to the contiguous 48 United States.
Returns: We offer a 60-day return window for most items. Products must be in their original, unused condition with all packaging. Exclusions: Special orders, clearance, and custom items.
Frequently Asked Questions
Can HTL-COB-CW-100 operate as one continuous 100 ft run?
Can HTL-COB-CW-100 operate as one continuous 100 ft run?
Where can HTL-COB-CW-100 be cut?
Where can HTL-COB-CW-100 be cut?
What driver does HTL-COB-CW-100 require?
What driver does HTL-COB-CW-100 require?
Does HTL-COB-CW-100 fit every 10 mm channel?
Does HTL-COB-CW-100 fit every 10 mm channel?
Can HTL-COB-CW-100 be dimmed?
Can HTL-COB-CW-100 be dimmed?

