GM Lighting LOC2-TT-6 6-Inch Low-Profile Tape-to-Tape Wire Connector
In stock
About this item
About this item
- 6-Inch Connection: The 6-inch tape-to-tape wire connector provides a wired link between separate tape sections.
- Two-Conductor Wire: White/white stripe jacketed 18/2 AWG wire provides the connection between tape ends.
- LTR-S Ultra Compatibility: GM Lighting lists this low-profile connector for its LTR-S Ultra LED tape.
- Snap-Closed Installation: Tape ends slide into the connectors and snap closed with pins aligned to the copper pads.
- Load Limits: Maximum current through the connector is 5A; power supply output and tape run limits must also be observed.
Description
Description
GM Lighting LOC2-TT-6 is a nominal 6-inch wired connector that joins two sections of GM Lighting LTR-S Ultra LED tape. Its low-profile tape connections snap closed. White/white stripe jacketed 18/2 AWG wire provides a wired connection between tape sections.
The tape ends slide into the connectors, which snap closed. Cut tape only at marked trim points, peel back 1/4 inch of adhesive backing, and align connector pins with the copper pads while maintaining polarity.
Maximum current through the connector is 5A. Do not exceed the power supply rated output. Observe the selected tape's maximum run length and fully test connections before final installation. LED tape and an appropriate GM Lighting power supply are required separately.
Specifications
Specifications
Dimensions
Documents
Item Details
Frequently Asked Questions
What does this connector connect?
What does this connector connect?
How long is this model?
How long is this model?
How does it differ from LOC2-TT-3?
How does it differ from LOC2-TT-3?
How are the tape ends installed?
How are the tape ends installed?
What is the maximum current through the connector?
What is the maximum current through the connector?
