GM Lighting LOC2-TP-60-90T 60-Inch Low-Profile L/T Tape-to-Power Wire Connector
In stock
About this item
About this item
- 60-Inch Power Feed: The nominal 60-inch wire connector provides a tape-to-power connection for LTR-S Ultra layouts.
- L/T Connection Format: GM Lighting identifies this model as a low-profile L/T connector and a 90-degree tape-to-power option.
- Two-Conductor Wire: White/white stripe jacketed 18/2 AWG wire provides the power-feed lead.
- T-Side Preparation: The LOC2 instructions require adhesive backing to remain on the T side before inserting tape and snapping closed.
- Load Limits: Maximum current through the connector is 5A; power supply output and tape run limits must also be observed.
Description
Description
GM Lighting LOC2-TP-60-90T is a 60-inch low-profile L/T tape-to-power wire connector for LTR-S Ultra LED tape. Its 90-degree connection format and white/white stripe jacketed 18/2 AWG wire support a power-feed layout at a tape junction.
Follow the LOC2 installation guide for the splice and T-side connections. Keep adhesive backing on the T side, align positive and negative polarity, and position connector pins on the copper pads before snapping closed.
Maximum current through the connector is 5A. Do not exceed the power supply rated output. Observe the selected tape maximum run length and test the system before final installation. Compatible LED tape and an appropriate GM Lighting power supply are required separately.
Specifications
Specifications
Dimensions
Documents
Item Details
Frequently Asked Questions
What connection format does this model use?
What connection format does this model use?
Which tape is documented as compatible?
Which tape is documented as compatible?
Should adhesive backing be removed from the T side?
Should adhesive backing be removed from the T side?
How does it differ from LOC2-TP-60?
How does it differ from LOC2-TP-60?
What limits apply to the connected tape?
What limits apply to the connected tape?
