American Lighting NAVI DIM Series — All-In-One In-Wall LED Dimmer + Driver | 24V DC | 60W & 96W

The American Lighting NAVI DIM Series simplifies LED lighting systems by combining a professional in-wall dimmer switch and a constant voltage LED power supply into a single integrated unit. Mounting directly to a standard single-gang recessed electrical box, the NAVI DIM accepts 120V AC input and converts to a stable 24V DC output — eliminating the need for a separate driver, separate dimmer, and the compatibility issues that come with pairing them. Available in 60W and 96W at 24V DC, and in White, Black, and Almond finishes to match standard decora faceplate trims. Compatible with most 24V DC LED tape light and fixtures. cULus Listed, FCC, CE, RoHS compliant. >30,000-hour rated life.

Key Features

• All-In-One Dimmer + Driver: Combines an in-wall LED dimmer switch and constant voltage power supply into one device — no separate driver required.
• Output: 24V DC constant voltage; available in 60W (2.5A) and 96W (4A).
• Input: 120V AC (108–132VAC), 60Hz.
• Full-Range Dimming: 0.3–100% dimming range with no minimum load — 16KHz PWM output with gamma 2.2 curve for smooth, eye-friendly dimming.
• Single Pole or 3-Way: Operates as a single pole or 3-way dimmer with an on/off push switch.
• Adjustable Voltage Output: Built-in voltage output dial to compensate for voltage drop in longer tape light runs.
• Voltage Barrier Partition: Included partition allows high and low voltage circuits to be safely installed in the same switch box.
• No Derating When Ganging: Full rated wattage maintained — no derating required when ganging multiple units.
• Power Failure Memory: Recalls dimming settings prior to power interruption.
• Fits Decora Trims: Compatible with most standard decora faceplate trims (not included).
• High Efficiency & PFC: 91% efficiency at 120V max load; built-in PFC function with power factor >0.99.
• Certifications: cULus Listed, FCC, SELV, Class 2, Class P, CE, RoHS compliant. Indoor/Dry & Damp locations.
• Rated Life: >30,000 hours.

Physical Design & Installation

The NAVI DIM mounts to a standard single-gang recessed electrical box and fits most standard decora faceplate trims (sold separately). A voltage barrier partition is included for safe co-installation of high and low voltage wiring in the same switch box. Available in White (WH), Black (BK), and Almond (AL) to match existing decor. No derating is required when ganging multiple units side by side. Installation must be performed by a qualified, licensed electrician in accordance with national and local electrical codes and the NEC.

Dimming & Controls

The NAVI DIM delivers 0.3–100% dimming with no minimum load requirement — eliminating the flicker and dropout common with traditional dimmer/driver pairings. Output is 16KHz PWM with a gamma 2.2 curve for smooth, eye-friendly light level transitions. Power failure memory retains settings when power is interrupted and restored. Operates as a single pole or 3-way configuration with an integrated on/off push switch.

Performance & Build

Input: 120V AC (108–132VAC), 60Hz. Output: 24V DC, 60W (2.5A) or 96W (4A). Dimming: 0.3–100%, 16KHz PWM, gamma 2.2. Efficiency: 91% @ 120V. Power Factor: >0.99 (built-in PFC). THD: ≤10% @ max load. Standby Power: ≤0.5W. Protections: Short circuit, thermal runaway, over-voltage. Operating Temp: -40°C to 60°C. Ambient Temp: 0°C to 40°C. Rated Life: >30,000 hours. Certifications: cULus Listed, FCC, SELV, Class 2, Class P, CE, RoHS. Location: Indoor / Dry & Damp.

Typical Applications

• Residential LED tape lighting systems requiring in-wall dimming control
• Under-cabinet, cove, and accent lighting with simplified installation
• Retrofit projects eliminating separate driver + dimmer compatibility issues
• Hospitality and light commercial 24V DC LED tape applications
• Single-gang switch box installations with 3-way switching capability