Home > Ballasts > LED Emergency Drivers > Power Sentry PS1030 FIK - LED Reduced-Profile Emergency Driver - Field install kit - 10W - 30V DC

Power Sentry PS1030 FIK - LED Reduced-Profile Emergency Driver - Field install kit - 10W - 30V DC

  • Product Code:
    PS1030-FIK
  • Mfg. Code:
    PS1030 FIK
PS1030 FIK
PS1030 FIK
$167.00
Usually Ships in 24 to 48 Hours
Free Shipping over $99
Wattage 10W Wet Location Certifications NFPA Warranty 5

Availability

In Stock
-
+

Accessories

Description

The PS1030 multi-volt (120V thru 277V; 50-60hz) emergency LED driver is designed to provide a minimum of 90 minutes of illumination for LED luminaires during the loss of normal AC power. It is UL classified for field installation in specified luminaires and UL recognized for factory installation inside indoor, damp or sealed and gasketed wet location listed LED luminaires utilizing 10-watts maximum output power, 30VDC maximum output voltage and an output current in the range of 365-395mA.

  • Durable thermoplastic housing resists impact, scratches, and corrosion
  • The pilot light/test switch provides visual and manual means of monitoring the system operation
  • Mounts concealed within fixture wireway for clean appearance and protection against vandalism; or mounts on outside of fixture housing if internal space is limited
  • Field install kit
  • UL classified for field installation in the following ABL fixture families: ACL, ALL, AVL, FSL, GTL, LBL, RD4M, SPM9L, BRM9L and BRW9L

Full Specs

  • Brand
    Power Sentry
  • Wattage
    10W
  • Input Voltage
    120-277V
  • Output Voltage
    30V DC
  • Output Voltage Type
    DC
  • Battery Power Duration
    90 Minutes
  • Emergency Battery Type
    Nickel-Cadmium
  • Dimmable
    No
  • Wet Location
    Yes
  • Damp Location
    Yes
  • Certifications
    UL NFPA OSHA
  • Operating Temperature
    0°C - 50°C
  • Warranty
    5 Years
  • Length
    13.30 in
  • Width
    2.20 in
  • Height
    1.20 in