Bathroom Exhaust Fan with Motion and Humidity Sensor - 80-110 CFM - 0.3-0.8 Sones - 6 in. Duct

(0) No Reviews yet
$202.30
SKU: SIG80-110MH

11 Available

Select Store to check availability.

Ships free over $99!

The Delta SIG80-110MH bathroom exhaust fan with motion and humidity sensor features 80 CFM, 110 CFM fan airflow and 0.3 sones, 0.8 sones for use in bathrooms. This bathroom fan has 6 inch duct size and can be installed on the ceiling. The Delta bathroom fan is made of galvanized steel for the housing and ABS material for the grille.

  • Energy Star Most Efficient 2018
  • Perfectly quiet operation at less than 0.3 Sones
  • When motion is detected, fan runs at full speed. When user leaves, fan remains running at full speed until delay time (20 minutes) has passed, then fan runs humidity control mode
  • For humidity control mode, when humidity is above the user-adjustable set-point, fan runs at full speed. When humidity is below the set-point, the fan runs continuously at a pre-set lower level (0, 30, 50, 60, or 80 CFM)
  • Adjustable humidity set points between ~50% to ~90% RH
  • Energy efficiency at 15.4 CFM/Watt
  • Includes 6” to 4” duct reducer
  • Easy installation with expandable extension bracket
  • Blue and amber LED indicator lights to show humidity sensor and full speed modes
  • Annual energy cost for 24/7 operation is approximately $6.50*
  • Removable with permanently lubricated plug-in motor
  • Housing is made of galvanized steel
  • Local and whole building continuous and intermittent operation
  • HVI, UL and CUL certified and can be used to comply with ASHRAE 62.2 requirements
  • Meets California Title 24 requirements
  • Three year warranty

Ratings & Reviews

No reviews available

Be the first to Write a Review