Bathroom Fan with Light & Humidity Sensor 80-110 CFM 0.3 Sones
The Delta SIG80-110HLED bathroom exhaust fan with LED light and humidity sensor features 80 CFM, 110 CFM fan airflow and 0.3 sones, 0.8 sones for use in bathrooms. This bathroom fan has 6 inch duct size and can be installed on the ceiling. The Delta bathroom fan is made of galvanized steel for the housing and ABS material for the grille.
- Energy Star Most Efficient 2018
- Perfectly quiet operation at less than 0.3 Sones
- Full speed adjustable, 80 or 110 CFM
- LED life is 30,000 hours (compare with 10,000 hours CFL life)
- Includes one 13-watt dimmable LED light (equivalent to a 60-Watt incandescent bulb - dimmer switch not included) and 2-watt led nightlight
- Main light output 800 Lumens, 3000K
- Input Voltage 120V
- Bulb Base Connector
- Energy efficiency at 13.8 CFM/Watt
- Allows fan to operate in full speed mode or humidity control mode by manual switch
- For continuous low speed mode, the fan runs continuously at a user-preset lower level (0, 30, 50, 60, or 80 CFM)
- Delay time preset positions (0.5, 5, 15, 30, 45, or 60 min)
- Green and amber LED indicator lights show continuous low speed and full speed modes
- Includes 6” to 4” duct reducer
- Easy installation with expandable extension bracket
- Annual energy cost for 24/7 operation is approximately $7.20*
- Housing is made of galvanized steel
- Local and whole building continuous and intermittent operation
- HVI, UL and CUL certified and can be used to comply with ASHRAE 62.2 requirements
- Meets California Title 24 requirements
- Three year warranty
Ratings & Reviews
2 reviews
Sig80 110hled vent fan
by Garry P. -
Excellent vent fan. Easy to install. Love the humidity control. Would recommend to anyone.
Delta signature fan
by Craig P -
Bees lighting delivered as promised and on time with a fair price. The Delta fan was easy to install, very quiet and seems to be working well. Have not had a chance to fully test auto humidity and/or motion sensing capabilities. The one nit I have is instructions on wiring and configuring the different modes is not clear and haven't been able to get it to turn on light without the fan on.