6" LED Remodel Housing

Recessed incandescent housings for 2x8 remodel construction. Approved for direct burial in insulation and all ceiling and wiring types.

L7XR: Air-tight aluminum housing with heavy-gauge galvanized steel raceway arm. Remodel clips for installation in existing plaster, sheet rock or mechanical ceilings. Galvanized steel junction box with three built-in ROMEX clamps and ground wire. Not suitable for pulling wires. Rated for 90°C. Socket clips to trim to ensure proper and consistent lamp position.

• Recessed housing rated IC or Non-IC. For remodel construction only
• Approved for factory assembled wiring only
• Approved for direct burial in insulation
• Aluminum foam-gasketed housing with three remodel clips for installation in existing plaster, sheet rock or mechanical ceilings
• Galvanized steel junction box with four built-in romex clamps, five 1/2" knockouts with slots for pryout
• Quick disconnect provided for connection to LED modules
• Housing and LED module combination is IC rated and thermally protected