Occupancy Motion Sensor Switch 360 Deg. Ceiling mount White
Classroom Lighting Control has never been more cost effective than with the CMR PDT 10 2P. This sensor provides Dual Technology detection up to a 40' by 40' classroom, and can handle A/B (Inboard/Outboard) switching. On a typical 9 ft ceiling, simply mount a standard round fixture box 20 ft up and in from the door. This sensor requires NO CALIBRATIONS! The time delay is factory set at 10 minutes (adjustable up to 20 minutes). In new construction, simply use the sensor's mounting box as the main junction for the wiring. In retrofits, the universal mounting allows for standard mud rings, or surface raceway enclosures, allowing the sensor to be wired before or after the switches. For smaller rooms or higher ceilings, consider the CMR PDT 9 2P. For areas with abundant natural light, each pole can be inhibited based on sunshine by using the CMR PDT 10 2P P. In cold damp environments like locker rooms, use the CMR PDT 10 2P LT.
- 100% Digital PIR Detection
- Excellent RF Immunity
- 360º Coverage Pattern
- Two Self-Contained Relays
- No Power Pack(s) Needed
- No Minimum Load Requirements
- Interchangeable Hot & Load Wires
- Impossible to Wire Backwards
- Push-Button Programmable (more...)