LED Ready High Bay - 6-Lamp - LED T8 bulbs not included

8 Reviews
1 – 9$80.49
10 – 23$78.08
24 +$76.47
Brand: MaxLite
Series/Collection: MaxLite BLHT Series
Mfr Part Number: BLHT6XT8USE4815

Only available for Shipping

3 Available

In Stock

Ships free over $99!


The MaxLite T8 LED Lamp Ready linear Highbays are UL listed fixtures designed specifically for LED T8 lamps. These Linear Highbay are constructed of the same durable materials as our Commercial Industrial grade fluorescent and LED PCB versions. These fixtures support competitive light output when used with MaxLite brand T8 LED single ended lamps. These fixtures are verified for use in Highbay, Lowbay, assembly, warehouse, and other general lighting applications.

  • Lamps not included
  • Designed for LED Single Ended lamps - supplied separately
  • Maximum photometric efficiency with directional lamps
  • V-Hooks std. with fixture, cable kit mounting accessory available
  • Hinged Access Door for Emergency back up ballast access
  • 5 year warranty
  • Knockouts on each end for motion sensor mounting

Brochures & Spec Sheets

Spec SheetMaxLite BLHT6XT8USE4815 SpecsDocumentationMaxLite BLHT6XT8USE4815 Installation

Electrical & Operational Information

Input Voltage120-277V


Color FinishWhiteDimming ControlNone
Fixture Mounting TypeV-Hook MountHousing MaterialSteel
Lens TypeAcrylic

Warranty & Certifications

Product Warranty5 Years

Dimensions & Measurements

Product Length (in.)48Product Width (in.)15
Product Height (in.)3

Ratings & Reviews

8 reviews

  • 3 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews
3/16/2017 12:00:00 pm

Lights were good quality and

by Sarah H -

Lights were good quality and easy to install

10/30/2016 12:00:00 pm

MaxLite High Bay 6 Lamp with DivaLite LED Tubes

by Kenneth M -

The MaxLite 6 Lamp High Bay (BLHT6XT8USE4815) fixtures are solid and well built. I wanted to attach these directly to the ceiling. Spoke with customer service and they said they could be direct mounted. It is possible, but if you intend to use the factory holes, you will have to remove the reflectors and the tombstones on each end. Both are simple issues. The three reflectors have four twist locks which need to be twisted 90 degrees and then each tombstone has two screws which need to be removed. I then ran surface conduit between each fixture, using the knockouts on narrow end. The fixture comes without tubes. I chose the DivaLita LED Tubes, 2200 lumens, 18 watts, 5000K CCT (T8R-48-22L-50K-B) Packaging was good and protected the lights well. The fixtures and tubes arrived within 10 days. Bought ten of these fixtures for my 28� by 36� by 10� new shop. I installed two rows of five along the 36� length with the fixtures 4 foot length running the same direction as the 28� walls of the shop. The fixtures were spaced at 65 inches from the knockout in one fixture (narrow end) to the knockout in the next fixture. I have zero issues with shadows and the light is very bright. A friend asked if I was opening an operating room! Very satisfied with the total solution and I would highly recommend both!

9/6/2016 12:00:00 pm

Good quality fixture at a reasonable price

by Johan -

I searched all over the internet for a reasonably priced, multi tube, LED Ready fixture, and found this web site. I ordered one of these 6 bulb fixtures, along with 6 - 2200 lumen 5k led tubes, to test. Its a very good quality fixture. The bulbs are quite bright. Overall the price for the fixture and bulbs makes this a great value. I will be ordering more in the future. One thing to be aware of, and that is this fixture doesnt come with a prewired cord. Not a deal breaker for me, since I have a ton of computer cords lying around, so I was able to wire the fixture myself.